After 4 years of development the aptly named Eternity seat post from Hope is finally here. 

The clamp on the top is a fully adjustable splined knuckle style unit, but the splines are finer than on other similar looking clamps, as well as being deeper for more adjustability and a non-slip grip.

Also unlike other designs, which use a single bolt through the whole clamp, the Eternity uses twin M6 high-tensile bolts, which make adjusting the saddle angle or position a cinch.

• Altium T6 Aluminium construction
• 3D machined head
• Precision 5 axis machined full contact spline and clamp
• Low weight to strength ratio
• Made in the UK
• Size: 30.9mm x 400mm

The now proven range of Pro2 hubs have gone from strength to strength since they were launched. Countless tests,reviews and of course rider feedback have shown that the Pro2 is everything that we designed it to be.We have a couple of noticeable changes on the hubs now - first one is that they all now run stainless steel bearings throughout, bringing them inline with Pro3. These means longer life, smoother, free running and even more value for money. With the bearing change comes a new axle. The old 15mm axle is now replaced with a 17mm version. This means total compatibility with Maxle and Maxle Lite (reg) 12mm bolt through. This hub features a one piece 7075 aluminium rotor body and pawl carrier. Four pawls engage into a twenty-four tooth steel ratchet which is fixed into the hub shell and is sealed with a frictionless, non contact labyrinth seal. The axle runs on five cartridge bearings. All Pro2 hubs are standard 6 bolt disc compatible.The hub shell is machined from a solid billet of 2014 T6 aluminium.

• 32 hole
• Forged shell
• Aluminum axle
• 2 sealed Stainless Steel cartridge bearings for Front hub,
• 5 sealed Stainless Steel cartridge bearings for Rear hub
• 4-pawl mechanism for Rear hub
• 6-bolt disc ISO
• Front hub is 135mm OLD spacing using standard rear brake disc alignment
• Rear hub is 170mm OLD spacing
• Rear/XD 11/12-Speed Cassette Body for SRAM XX1/XO1

Set of 4 Pawls for Hope Pro 2 and Pro 3 hubs. Also suit the new Pro 2 EVO.

• Genuine Hope replacement pawls  for use with the Pro 2 Hub
• Fits Hope Pro2 EVO and Pro2 hubs

Hope Pawls and Springs Replacement for Hope Pro 2/3/EVO and Pro 4 hubs.

• Genuine Hope replacement pawls/springs for use with the Pro 2 Hub
• Fits Hope Pro 2/3/EVO/4
• Pawls and Springs sold each

Hope Bulb/XC Pack Of 3 Freehub Pawl Springs.

• Fits all older Hope freehub bodies
• Set of 3 Springs

Set of 3 Pawls for Hope XC Bulb Hubs.

• Genuine Hope replacement pawls for older Hope XC Bulb Hubs
• Set of 3 Pieces

Chainring with Integrated Bash Ring (IBR). Manufactured from 7075 T6 Aluminium alloy, hard anodised. To be used with 1x setups for XC, Trail, AM and Enduro and are designed to be used alongside our new range of Chain Guides.

• Hard anodised
• 104 BCD
• Weight: From 62g
• Chainring 36T

Semi-Metal pads offer the best compromise for riders. The hard wearing compound ensures that they perform well all year round against the mud and crud that riding can involve. Braking performance is even and consistent when you need it.

Semi Metal: >30<60 % Metal
Formulated specifically for frequent users giving improved off-road performance, ideal for cross country.

• Good all round breaking performance
• Improved wet performance (over organic)
• Average to high temperature use
• Improved pad wear (over organic)
• Good noise characteristics

Sintered: >60 % Metal
With very high metalic loading this compound has been formulated specifically for very frequent hard use in all environments, ideal for competitive cross country & down hill.

• Exceptional high temperature performance
• Exceptional wet performance
• Exceptional pad wear
• Good noise characteristics

These Pads fit following Brakes:

• Hope M4
• Shimano XT (M755)

Hope Hub Pro 2 EVO Hub Converter. Converts your standard QR Hub (Axle NOT included).

Fits Pro 2 EVO Hubs

• 12mm x 135mm TA