SRAM's XD Driver Body is designed specifically for use with the XX1 system. This is a new cassette driver body that will permit the use of a 10 tooth small cog and offer improved interface with the cassette. SRAM's XD Driver Body is compatible only with SRAM Rise 60 wheels and SRAM Rise 60 hubs. 

It is also possible to retrofit DT Swiss hubs for XX1 compatibility.

• Fits: SRAM Rise 60 Wheels and Hubs

PowerGlide II? SRAM's reliable and durable cassette technology. Our cassettes performance is optimized through tooth profile and shift ramp design for quick and positive index shifting.

• Technology: PowerGlide II
• Gear Ratios: 11-26
• Speed: 9
• Weight: 325g (11-26)
• Material: Steel with Red anodized Alloy Spacer

The 1050 cassette shifts efficiently and positivity in all high performance situations thanks to its tooth profile and shift ramp design.  To keep the weight down and improve upon cog stiffness a semi-spidered construction was used.  Nothing can compare to the performance of 10 speed!

• 10-Speed - Forged alloy spider holds largest cogs
• Heat treated steel cogs
• Steel lockring
• Cassette Cogs: 11-12-13-14-15-17-19-22-25-28
• Power Glide technology
• Approximate weight 299 grams
• Includes lock ring
• Cassette: 11-28T

Experience the precise, positive feel of SRAM with their X7 Trigger Shifters. They're perfect for casual and serious riders alike thanks to their aluminum and composite construction that both reduces weight and boosts strength. And, the X7s feature SRAM's 1:1 actuation ratio for the ultimate in crisp shifting.

• SRAM’s 10-Speed EXACT ACTUATION™ for precise and dependable 10-speed performance
• Impulse Technology
• MatchMaker compatible
• Clamp included
• Top cap cable change
• Speed: 10-Speed
• right side Shifter for 1x10-Speed setup

SRAM's X0 Front Derailleur is made from cold-forged aluminum and chrome-plated steel for exceptional reliability and a race-worthy weight. It boast’s SRAM’s X-Glide technology for super-smooth and lightning-quick shifting even under load. This 38/36T maximum chainring size version is the one you want if you are running a low-range double-ring setup.

• SRAM's Direct-Mount Front Derailleur requires extremely tight tolerances for optimum function.
• S3 Low Direct-mount, Bottom-pull
• Capacity: 14 teeth
• Your frame must be designed to fit a Low Direct-Mount Front Derailleur in order to use one. Please contact us with any compatibility questions.
• Weight: 130 grams
• Max Chainring: 38T

SRAM Rear Derailleurs - 1:1 shifter-to-derailleur actuation ratio for precise light-action indexing.

• Must be used with SRAM shifters
• Replaceable 11-tooth pulleys with bushings
• Aluminum upper knuckle
• Serviceable sealed bearing pulleys
• 1:1 shifter-to-derailleur actuation ratio for precise light-action indexing
• Exact Actuation shifting
• Weight: 245 grams
• Shifter/Derailleur Compatibility: SRAM 1:1
• Cassette Spacing: 9 Speed
• Cage: Short

Wide range 3X10 systems with X-Glide front shifting technology.

When we launched our road technology from scratch we reapplied our MTB proven SRAM 1:1 actuation ratio (shifter cable travel : derailleur movement) for 10 speed rear shifting. EA helps to simplify/stabilize the uneasy act of balancing rear derailleur hanger design, tight cog spacing and exact cable tension. The result: the easiest index shifting system to set up and it stays that way.

X-Glide is the common denominator that gives unmatched shifting performance. Four identical upshift locations, ready to be be picked up by any outer link. Result? Perfect timing, almost instantaneous shifts, up or down, even under load.

• Technology: X-Glide shifting technology
• Weight: 130 grams
• Compatibility: 10 speed only, 36 Tooth
• Mount Options: High Clamp 34.9mm
• Pull: Dual Pull
• Speeds: 2x10

PowerGlide II - SRAM's reliable and durable cassette technology. Our cassettes performance is optimized through tooth profile and shift ramp design for quick and positive index shifting.

• Technology: PowerGlide II
• Speed: 9 - 11-28T
• Weight: 280g
• Material: Steel

Cross Pro pads are hybrid pads that mate V-brake hardware or a smooth post cantilever post to a road cartridge pad.

• Compatible with cantilever brakes that use threaded hardware.
• Pro Series compound
• Inserts and cartridges use the Shimano road standard
• Can be used with linear-pull or cantilever style brakes
• Color: Black
• Post Mount Type: Threaded Post
• Pad Use: Standard
• Brake Fit: Cantilever

Avid Hydraulic Brake Lever Parts.

• Provides an adjustable mounting option for X.0, X.9 or X.7 Trigger shifters or PushLoc suspension controls
• Works on all Avid Split-clamp levers except XX and Elixir CR Mag
• Sold as a Pair