THE WEIGHT OF A TITANIUM AT A FRACTION OF THE COST.

Utilizing a thinner wire and less coils, FOX SLS (Super Lightweight Steel) rear springs deliver a light weight option for rear shock springs at a much lower cost than titanium version. They are also able to withstand higher stresses due to a proprietary surface treatment. These will fit all FOX coil shock and are available in 25lbs increments from 300lbs to 550lbs.

• Stroke: 2.5”-2.75”
• Weight: 292g
• Spring Rates: 300lbs to 550lbs
• Compatible with all FOX coil shocks

Fox Racing Shocks DHX 4.0 Boostvalve with Propedal adjustment.

Adjustments:

• Length: 8.5" x 2.5" (21.5cm ete)
• Rebound Adjustment
• ProPedal Adjustment
• Spring preload
• 2011 Model Year
• Spring not included - pls order the correct spring based on yr weight

The shock comes without Spring, Reducers or Bushings!

If you want the best, go straight to the source. These are Fox's Dust Wiper seals— the same seals used on their premium line of "Factory Series" forks.

• Great hop-up for your older Fox fork, essential for your Fox Fork
• Inspect and clean and/or change every 125 hours of riding use or anually for maximum performance and fork longevity.
• Select the kit that matches the stanchion tube size of your Fox fork
• Mfg Part No# 803-00-124
• No foam rings included

One of the single biggest improvements you can make to your fork!  
Engineered and developed over several years, PUSH Ultra Low Friction fork seals provide class leading sealing while offering the lowest friction of any seal on the market!

• Advanced friction-reducing, Molybdenum filled material increases small bump sensitivity while also increasing durability 
• Dual scraping lip design provides maximum scraping effect while minimizing friction 
• Loaded oil sealing lip integrated into wiper to keep lower leg fluid from 
• escaping fork increasing performance and durability 
• Vented case design allows easy installation 
• Integrated slots ease removal during maintenance 
• High-volume, absorbent foam rings ensure consistent lubrication improving seal life and bump sensitivity 
• Molded utilizing precision 3D machined molds for exact tolerance 
• Each kit comes complete with Fork Seals, Foam Rings, and Crush Washers
• Fits Fox 32, 34, 36 and 40

The SKF fork seal kit for mountain bikes has been developed to provide low friction during operation and maximum ground contact for the ultimate riding feeling. The kit is suitable for all high-end mountain bike forks and is made of the same self-lubricating compound used for superior motorcycle sealing applications. It consists of two integrated oil seal-dirt scrapers, crush washers and impregnated foam rings. Depending on the fork manufacturer, the kit may contain two oil seals and two dirt scrapers.

• Integrated dust sealing lip to prevent dirt entering the fork and thus contamination of other fork components
• Integrated  oil sealing lip to prevent oil leakage of the fork
• Pre-impregnated foam ring for enhanced friction reduction to the fork
• User friendly and quick replacement during periodical oil service

Benefits:

• Increased life and performance 
• Enhanced water and dirt protection capability 
• Reduced and constant friction over the life of seal 
• Much improved ride comfort 
• Compatibility with a wide range of OE and aftermarket oils 
• Reduced wear and air suction 
• Wide range of tailored sizes 

Fits:

• Fox34 - fits 2016/Current Forks (MTB34FN)
• Fox36 - fits 2015/Current Forks (MTB36FN)
• Fox38 - fits Current (MTB38FN)
• Fox40 - fits 2016/Current Forks (MTB40FN)
• Rockshox 35mm - fits 2008/Current Forks
• RockShox 35mm Flangeless - fits 2007/Current Forks
• RockShox 32mm, Fits A1-A2 SID (08- 16), Reba, Revelation, Recon, Sector, Argyle, Tora and XC32 Forks

The SKF fork seal kit for mountain bikes has been developed to provide low friction during operation and maximum ground contact for the ultimate riding feeling. The kit is suitable for all high-end mountain bike forks and is made of the same self-lubricating compound used for superior motorcycle sealing applications. It consists of two integrated oil seal-dirt scrapers, crush washers and impregnated foam rings. Depending on the fork manufacturer, the kit may contain two oil seals and two dirt scrapers.

• Integrated dust sealing lip to prevent dirt entering the fork and thus contamination of other fork components
• Integrated  oil sealing lip to prevent oil leakage of the fork
• Pre-impregnated foam ring for enhanced friction reduction to the fork
• User friendly and quick replacement during periodical oil service

Benefits:

• Increased life and performance 
• Enhanced water and dirt protection capability 
• Reduced and constant friction over the life of seal 
• Much improved ride comfort 
• Compatibility with a wide range of OE and aftermarket oils 
• Reduced wear and air suction 
• Wide range of tailored sizes 

Fits:

• Fox32 2003 to 2015

COIL SPRING GUIDELINES:

Green 45 lb/in (508 N-cm)
180 to 210lbs   >95kg

Fox Part No.: Fox Shox 039-05-133-KIT